Gaskets, Fasteners & Sealing Products
TROY ENERGY supplies a comprehensive range of gaskets, fasteners, and sealing products designed to ensure leak-free, secure, and reliable joints in industrial piping and equipment systems. Our products are engineered to meet stringent EPC and plant requirements for pressure, temperature, and service conditions.
We support EPC contractors, fabrication yards, and end users with consistent quality, full material traceability, and project-compliant documentation for onshore and offshore applications.
Product Range
• Spiral Wound Gaskets
• Ring Type Joint (RTJ) Gaskets
• Non-Asbestos & Soft Gaskets
• Graphite Gaskets
• Insulation Gaskets
• Stud Bolts & Nuts
• Hex Bolts & Nuts
• Anchor Bolts
• Washers
Standards & Specifications
|
Standard Body
|
Standards
|
|---|---|
|
ASTM
|
A193, A194, F104
|
|
ASME
|
ASME B16.20, ASME B16.21
|
|
API
|
API 6A
|
|
EN
|
EN 1514
|
|
DIN
|
DIN 2690
|
Material Grades
|
Material Type
|
Common Grades
|
|---|---|
|
Carbon Steel Fasteners
|
ASTM A193 B7, ASTM A194 2H
|
|
Stainless Steel Fasteners
|
ASTM A193 B8 / B8M
|
|
Alloy Steel Fasteners
|
ASTM A193 B16
|
|
Gasket Materials
|
Graphite, PTFE, Non-Asbestos
|
Specialty Alloys & Corrosion-Resistant Grades
|
Alloy Family
|
Grades / Specifications
|
|---|---|
|
Duplex Stainless Steel
|
ASTM A193 B7M / UNS S31803
|
|
Super Duplex Stainless Steel
|
UNS S32750 / S32760
|
|
Inconel (Nickel Alloys)
|
Inconel 625 (UNS N06625), 718 (UNS N07718)
|
|
Monel
|
Monel 400 (UNS N04400)
|
|
Hastelloy
|
Hastelloy C276 (UNS N10276)
|
|
Nickel Alloys
|
ASTM B160 / B161
|
|
Cu-Ni Alloys
|
90/10, 70/30 Copper Nickel
|
Size Range & Technical Details
|
Parameter
|
Range
|
|---|---|
|
Fastener Size
|
M6 to M100
|
|
Pressure Class
|
150# to 2500#
|
|
Gasket Types
|
RF, FF, RTJ
|
|
Coating
|
Black, Hot Dip Galvanized, PTFE
|
|
Operating Temperature
|
Up to 1000°C (Material Dependent)
|
Quality & Compliance
All gaskets, fasteners, and sealing products supplied by TROY ENERGY are sourced from approved manufacturers and are provided with complete quality documentation including Mill Test Certificates (EN 10204 3.1 / 3.2), dimensional inspection reports, material traceability, and third-party inspection where required.